Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 3
- Control panel 5
- Before loading the dryer 6
- Using the dryer 7
- 1. Turn on the dryer and load the laundry 7
- 2. Select a program 7
- 3. Select a drying option (if needed) 9
- 4. Select the dryness level 10
- 5. Select the buzzer (if desired) 10
- 6. Start the program 11
- 7. At the end of a program 11
- Canceling or changing a program 12
- Adding or removing laundry during a program 12
- Child lock 13
- Dryer care 14
- Quick Guide 21
- Frequently asked questions 21
- Technical Service 23
- INSTALLATION INSTRUCTIONS 25
- IMPORTANT SAFETY INSTRUCTIONS 26
- Caring for the environment 27
- Washer / Dryer Stack 28
- Electrical connection 29
- Installation 30
What if the dryer will not run?
Possible fault Fix
The "Start/Stop" button was not
pressed.
Make sure the dryer is on. Press the
"Start/ Stop" button to begin the drying
program.
The circuit breaker tripped or the dryer
is unplugged.
Make sure the dryer is plugged in or
reset the circuit breaker.
The door is not closed. Close the door properly.
How do I prevent static cling?
Add fabric softener to laundry when washing or select the "Less Dry" setting on
the dryer.
Do not use fabric softener sheets in this dryer.
What if the drum light does not come on?
Possible fault Fix
The bulb may be bad or burned out. See "Changing the light bulb."
What if the "Child Lock" indicator flashes after turning the dryer on and a
program cannot be started?
Possible fault Fix
The child lock is activated. Deactivate the child lock. See "Child
Lock."
What if the program stops, the "Anti-crease/End" indicator lights and the
buzzer sounds?
Possible fault Fix
The drum is empty. Load laundry into the dryer. The dryer
will not operate when the drum is
empty. Single items should be dried
with "Sturdy" or a timed program and
dry items in the "Fluff" program.
Frequently asked questions
21