Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 3
- Control panel 5
- Before loading the dryer 6
- Using the dryer 7
- 1. Turn on the dryer and load the laundry 7
- 2. Select a program 7
- 3. Select a drying option (if needed) 9
- 4. Select the dryness level 10
- 5. Select the buzzer (if desired) 10
- 6. Start the program 11
- 7. At the end of a program 11
- Canceling or changing a program 12
- Adding or removing laundry during a program 12
- Child lock 13
- Dryer care 14
- Quick Guide 21
- Frequently asked questions 21
- Technical Service 23
- INSTALLATION INSTRUCTIONS 25
- IMPORTANT SAFETY INSTRUCTIONS 26
- Caring for the environment 27
- Washer / Dryer Stack 28
- Electrical connection 29
- Installation 30
Changing the light bulb
,
To reduce the risk of electric
shock, disconnect the dryer from the
power supply by shutting off the
power main, tripping the circuit
breaker or unplugging the power
cord before performing
maintenance.
^
Open the door.
The bulb cover is located along the
upper rim of the drum opening.
^
Slide a screwdriver with a wide head
underneath the side edge of the bulb
cover and twist (see illustration).
^
Flip down the bulb cover.
^
Replace the light bulb with a
temperature proof bulb, available
from Miele.
The light bulb must not exceed the
maximum wattage listed on the data
plate.
^
Flip up the light bulb cover and press
it firmly until it clicks into place.
,
Make sure the bulb cover is
securely closed to prevent a short
circuit or penetrating moisture.
^ Restore power.
Dryer care
20