Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 3
- Control panel 5
- Before loading the dryer 6
- Using the dryer 7
- 1. Turn on the dryer and load the laundry 7
- 2. Select a program 7
- 3. Select a drying option (if needed) 9
- 4. Select the dryness level 10
- 5. Select the buzzer (if desired) 10
- 6. Start the program 11
- 7. At the end of a program 11
- Canceling or changing a program 12
- Adding or removing laundry during a program 12
- Child lock 13
- Dryer care 14
- Quick Guide 21
- Frequently asked questions 21
- Technical Service 23
- INSTALLATION INSTRUCTIONS 25
- IMPORTANT SAFETY INSTRUCTIONS 26
- Caring for the environment 27
- Washer / Dryer Stack 28
- Electrical connection 29
- Installation 30

Cleaning the condenser
^
Rinse the condenser along all sides
with warm water as shown in pictures
below.
^ Check the condenser for visible
soiling. Continue rinsing until the
condenser until clean.
^
Check the condenser gasket for
soiling.
Do not remove or kink the gasket!
^
Place the condenser lengthwise on a
towel to air dry.
Returning the condenser
^
Put the condenser back in place in
the reverse order.
Check the gasket around the front of
the condenser is flush and not
crimped.
^
To prevent leaks, make certain the
condenser is pushed in all the way
and locked in place.
^
Restore power.
Dryer care
19