Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 3
- Control panel 5
- Before loading the dryer 6
- Using the dryer 7
- 1. Turn on the dryer and load the laundry 7
- 2. Select a program 7
- 3. Select a drying option (if needed) 9
- 4. Select the dryness level 10
- 5. Select the buzzer (if desired) 10
- 6. Start the program 11
- 7. At the end of a program 11
- Canceling or changing a program 12
- Adding or removing laundry during a program 12
- Child lock 13
- Dryer care 14
- Quick Guide 21
- Frequently asked questions 21
- Technical Service 23
- INSTALLATION INSTRUCTIONS 25
- IMPORTANT SAFETY INSTRUCTIONS 26
- Caring for the environment 27
- Washer / Dryer Stack 28
- Electrical connection 29
- Installation 30
Cleaning the lint filter
The lint filter must be cleaned after
every program.
^ Open the door and remove the lint
filter by gently lifting it upwards.
^
Wipe the lint off the filter with your
hand (do not use any sharp objects!)
^ Remove the lint from the door frame
lint filter with your fingers.
^ Any lint remaining in the hollow
casing of the door can be removed
through the gap at the bottom with a
dust brush or vacuum.
^ Return the lint filter and close the
door.
The lint filters (once removed from
the dryer) can be rinsed with hot
water if necessary. The filters must
be dried thoroughly before being
returned to the dryer.
^
Take the door lint filters out by turning
the knob at the filter top.
Dryer care
14