Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 3
- Control panel 5
- Before loading the dryer 6
- Using the dryer 7
- 1. Turn on the dryer and load the laundry 7
- 2. Select a program 7
- 3. Select a drying option (if needed) 9
- 4. Select the dryness level 10
- 5. Select the buzzer (if desired) 10
- 6. Start the program 11
- 7. At the end of a program 11
- Canceling or changing a program 12
- Adding or removing laundry during a program 12
- Child lock 13
- Dryer care 14
- Quick Guide 21
- Frequently asked questions 21
- Technical Service 23
- INSTALLATION INSTRUCTIONS 25
- IMPORTANT SAFETY INSTRUCTIONS 26
- Caring for the environment 27
- Washer / Dryer Stack 28
- Electrical connection 29
- Installation 30
6. Start the program
^
Press the "Start/Stop" button.
Once the program starts, the current
cycle of the program will be indicated
in the "STATUS" display.
7. At the end of a program
The "Anti-crease/End" indicator will light
at the end of a program and the buzzer
will sound if it was selected.
If a fault occurred, a "FAULT" indicator
will light. See "Frequently asked
questions" for details.
^
Press the "Door" button.
^
Open the door.
^ Remove the laundry.
^ Check that the drum is empty.
^ Clean the lint filter after each use
(see "Dryer care").
^ Close the door.
^
Press the "On/Off" button to turn off
the dryer.
^
Empty the condensed water
container weekly (if not connected to
a drain).
Using the dryer
11