Technical information

Touchtronic Clothes Dryers - List of Figures
D-1 Layout of Components – Vented Models 9
D-2 Layout of Components – Condenser Models 11
010-1 Cabinet Construction 15
010-2 Support bracket 17
020-1 Removing the outer door panel 21
020-2 Door Lock 22
030-1 Drum Bearing 28
030-2 Drum Rib Hardware 29
030-3 Drum Bearing 30
030-4 Heater Bank Components 31
030-5 Wiring Harness Holder 32
030-6 Access Panel to Heater Bank (Removed) with Heater Bank 33
030-7 Wiring Harness Holder 34
030-8 Residual Moisture Sensor Brush Replacement 35
030-9 Rear Drum Seal 36
040-1 Motor and Fan Impellers (Condenser Model) 39
040-2 Drives 40
050-1 Drum Support Housing (vented) 47
050-2 Drum Support Housing (condenser) 48
050-3 Front Drum Support Bearing 50
050-4 Opening the Light Bulb Cover 51
055-1 Condenser Box Assembly 55
055-2 Float Switch and Drain Pump 56
055-3 Condenser Drawer 57
055-4 Condenser Box Access Panel 59
055-5 Condenser Door Lock 59
055-6 Unlocking the Condenser Box Lock 59
055-7 Removing the Condenser Box 60
055-8 Rinsing the side of the Condenser Box 60
055-9 Rinsing the Condenser Box 60
060-1 Fascia Panel Removal 72
060-2 Electronic Retaining Screw 73
060-3 Button Assembly 74
060-4 Electronic / Controls in service position 74