Operating instructions
Table Of Contents
- Contents
- Caring for the environment 3
- Description of the appliance 4
- Warning and Safety instructions 6
- Preparing for use 12
- Using the accessories supplied 16
- Use 17
- Setting down, transportation and storage 22
- Maintenance and care 23
- Purchasing new dustbags and filters 23
- Ordering the correct dustbags and filters 23
- When to change the dustbag 24
- Replacing the dustbag 25
- When to change the exhaust filter 26
- Correctly replacing the Air Clean filter 27
- Replacing the Active Air Clean or Active HEPA filter 28
- Replacing one type of exhaust filter with another 29
- When to change the dust compartment filter (for motor protection) 30
- Correctly changing the dust compartment filter 30
- When to change the battery in the radio frequency operated handle 31
- How to change the battery in the radio frequency operated handle 31
- When to change the thread lifters 32
- Correctly replacing the thread lifters 32
- Cleaning and care 33
- Problem solving guide 34
- After sales service / Electrical connection 35
- Optional accessories 36
ParkSystem for pauses in
vacuuming
A parking system has been designed
for conveniently parking the vacuum
cleaner during pauses.
^
Slot the floorhead into the parking
attachment at the back of the vacuum
cleaner.
If the vacuum cleaner is parked on a
sloped surface, e.g. on a ramp,
retract all parts of the telescopic
wand completely.
ParkSystem for storage
,
It is important to switch off the
vacuum cleaner after each use.
Switch off at the wall socket and
remove the plug.
There is a parking attachment on either
side of the vacuum cleaner.
It is also helpful to retract the
telescopic wand fully.
^
Slot the floorhead downwards into the
parking attachment on the side of the
vacuum cleaner.
This makes the vacuum cleaner easier
to carry or store.
Setting down, transportation and storage
22