Operating and Installation Instructions

Supervisor level
85
Special programs
You can put together 5 special pro-
grams and save them as your own
wash programs with your own pro-
gram names.
You must have already activated Spe-
cial programs under Program packages.
Enter the name of your special program
and its basic settings into the “Special
programs” table under the “Program
chart”.
– Temperature: You can select a tem-
perature in multiple increments from
cold to 194°F (90°C).
– Wash block: You can select one or
more wash blocks.
– Spin speed: You can select a spin
speed in increments from 600rpm to
1,400rpm.
Sort programs
Programs can be moved within the
program list and in the Favorites list.
Factory default: Off
Moving programs
 Touch the sensor control for the pro-
gram you want to move.
 Press and hold the sensor control un-
til the frame changes.
 Drag the program to the required
place.
Program color allocation
You can assign a color to a Favorite
program. In the list of Favorites, each
Favorite program is given a colored
frame, which can be adjusted.
Factory default: On
Hygiene
The Maintenance wash hygiene program
is shown in the list of special pro-
grams.
If a program at a temperature below
140°F (60°C) has been used, a request
to start the Maintenance wash hygiene
program appears in the display.
Factory default: Off
Disinfection program code
A code has to be entered to cancel a
disinfection program. The code can be
modified.
The code is: 000
Make a note of your new code if you
ever change it.