Operating and Installation Instructions

Program chart
35
Maintenance wash hygiene No load
– If a program at a temperature below 140°F (60°C) has been used,
a request to start the Maintenance wash hygieneprogram appears
in the display. The Hygienesetting must be switched on for this
purpose (see “Supervisor level”).
– Add universal detergent to the compartment.
Sport
Sportswear 86°F to 140°F (30°C to 60°C) Max. load 7.7lb (3.5 kg)
Items Sports and leisure wear, such as shirts and trousers made from syn-
thetic fibers or mixed blends
Tip – If you wish to proof the items at the same time, add the proofing
agent to the compartment in the detergent dispenser drawer.
– Do not use fabric softener.
– Observe the manufacturer’s care label.
1,000rpm Extra options: Pre-wash, Soak, Rinse
hold
Rinses: 2
SportMicrofiber 86°F to 140°F (30°C to 60°C) Max. load 7.7lb (3.5 kg)
Items Sportswear such as jerseys and leggings, as well as microfiber and
fleece garments
Tip – Do not use fabric softener.
– Observe the manufacturer’s care label.
800rpm Extra options: Rinse plus, Rinse hold Rinses: 2
Sneakers 86°F to 140°F (30°C to 60°C) Max. 2 pairs
Items Sneakers (no leather shoes), shin pads, elbow protectors, and simi-
lar items
Tip – Do not use fabric softener.
– Coarse soiling should be brushed off first.
– Observe the manufacturer’s care label.
– Use the dryer basket for tumble drying.
– Close Velcro fasteners.
400rpm Extra options: Pre-wash, Pre-rinse Rinses: 3