Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Front view
- Rear view
- Installation locations
- Installation notes
- Transporting the washing machine to its installation site
- Installation surface
- Removing the shipping struts
- Re-installing the shipping struts
- Leveling the washing machine
- External control equipment
- Water connection
- Water drainage
- Electrical connection
- Technical data
- Supervisor level
Initial commissioning
20
Setting up a payment system
If you wish to set up a payment system,
read the “Payment system” section of
the “Supervisor level” chapter.
These settings can only be changed
during the initial commissioning
process. If you wish to change the set-
tings after the commissioning process,
please contact Miele Technical Service.
If you do not wish to set up a payment
system, you can skip this stage.
11:02
No payment
system
Payment system
OK
Program
control
Timed
operation
KOM module
Touch the No payment systemsensor
control.
The display will change to the next set-
ting.
Selecting pre-wash water
11:02
Cold
Pre-wash
OK
Hot
Touch the coldsensor control if the
washing machine is only connected
to a cold water supply, or touch hotif
the washing machine is connected to
cold and hot water.
The display will change to the next set-
ting.
Selecting main wash water
11:02
Cold
Main wash
OK
Hot
Touch the coldsensor control if the
washing machine is only connected
to a cold water supply, or touch hotif
the washing machine is connected to
cold and hot water.
Further information will appear on the
display.