Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Front view
- Rear view
- Installation locations
- Installation notes
- Transporting the washing machine to its installation site
- Installation surface
- Removing the shipping struts
- Re-installing the shipping struts
- Leveling the washing machine
- External control equipment
- Water connection
- Water drainage
- Electrical connection
- Technical data
- Supervisor level
Operating the washing machine
12
Control panel
a
Language sensor control
For selecting the current user lan-
guage.
The operating language is displayed
again at the end of the program.
b
Back sensor control
Takes you back one level in a menu.
c
Touch display
d
Sensor control Start/Stop
For starting the program selected and
canceling a program once it has
started. The program selected can be
started as soon as the sensor control
starts flashing.
e
Optical interface
For Technical Service.
f
button
For switching the washing machine
on and off. To save energy, the wash-
ing machine will switch off automati-
cally. It is switched off 15minutes af-
ter the end of the program/anti-
crease phase, or after being switched
on if no further selection is made.