Operating and Installation Instructions

Installation and connection
*
I
N
S
T
A
L
L
A
T
I
O
N
*
73
 Use a spirit level to check that the
washing machine is standing level.
 Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again us-
ing the wrench supplied until it sits
firmly up against the housing.
 Risk of damage due to incor-
rectly aligned washing machine.
There is a danger of the washing ma-
chine moving about if the feet are not
secured.
Turn all 4 counter nuts for the feet
until they sit firmly up against the
housing. Please also check this for
the feet which did not need adjust-
ment.
Securing the washing machine
against slippage
 Secure the front feet of the washing
machine using the clamps supplied.
 Follow the installation instructions
supplied.
External control equipment
The XCI box accessory is needed to
connect external control equipment,
such as payment systems, dispensing
systems or peak load control units.
Payment system
This washing machine can be fitted with
a payment system (optional accessory).
The necessary reprogramming must al-
ways be carried out by Miele Technical
Service or a Miele Service Dealer.
Coins/tokens must be removed from
the coin box regularly. Otherwise, the
payment system will become blocked.