Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Front view
- Rear view
- Installation locations
- Installation notes
- Transporting the washing machine to its installation site
- Installation surface
- Removing the shipping struts
- Re-installing the shipping struts
- Leveling the washing machine
- External control equipment
- Water connection
- Water drainage
- Electrical connection
- Technical data
- Supervisor level
Installation and connection
*
I
N
S
T
A
L
L
A
T
I
O
N
*
72
Secure the shipping struts to the
back of the washing machine.
Tip: Make sure that the holes are
placed over the retainers.
Risk of damage from incorrect
transport.
The washing machine may become
damaged if moved without the ship-
ping struts in place.
Keep the struts in a safe place. In-
stall them again if the machine is to
be moved.
Re-installing the shipping
struts
Re-installation is carried out by revers-
ing the procedure.
Leveling the washing machine
The washing machine must stand per-
fectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase elec-
tric and water consumption and may
cause the machine to move about.
Unscrewing and adjusting the feet
The 4 adjustable screw feet are used to
level the washing machine. All four feet
are screwed in when the machine is de-
livered.
Using the wrench supplied, turn
counter nut 2 in a clockwise direction.
Then turn counter nut 2 together with
foot 1 to unscrew.