Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Installation and connection
*INSTALLATION*
75
Installing the holding bracket
Place the holding bracket on the
marking on the toe-kick.
In the middle of the two outer slotted
holes, mark a point for each drill hole.
Drill 2holes 5/16" (8mm) with a
depth of approx. 2 3/16" (55mm).
Insert the plugs in the holes.
Install the holding bracket with the
hex screws and the washers.
Do not tighten the screws yet – this
will allow the holding bracket to be
moved sideways.
Securing the washing machine with
the holding bracket
Push the washing machine back on
to the installed holding bracket.
Insert the appliance feet (the part be-
tween the foot and the locknut) into
the openings in the holding bracket.
Push the holding bracket to the right
as far as it will go.
Tighten the hex screws using a
wrench.
The washing machine is secured in the
holding bracket.