Operating instructions/Installation instructions

Installation and connection
*INSTALLATION*
68
Installation locations
Side view
44 9/16" (1,132 mm)
33 7/16" (850 mm)
43 1/3" (1,000 mm)
28 1/8" (714 mm)
Washer-dryer stack
The washing machine can be installed
as a washer-dryer stack together with a
Miele Tumble Dryer. A stacking kit
(APCL 001, optional accessory) is re-
quired for this.
Installation on a plinth
The washing machine can be installed
on a steel plinth (open or closed, e.g.
APCL 002, APCL 003, APCL 005, APCL
007, APCL 011 or APCL 012, available
as an optional Miele accessory) or on a
concrete plinth.
 Injury can occur if the washing
machine has not been adequately
secured.
When installing the machine on a
plinth, there is the danger of the
washing machine falling off the plinth
during spinning.
Secure the washing machine using
the clamps supplied.
Installation notes
This washing machine is not suitable
for building under.
 Risk of damage due to moisture
ingress.
Moisture can damage electrical com-
ponents.
Do not install the machine near or di-
rectly above an open gully or floor
drain.