Operating instructions/Installation instructions

Supervisor level
98
Payment system
External hardware is connected via the
Miele XCI Box.
If you wish to change the settings after
the commissioning process, please
contact Miele Technical Service.
Settings for payment systems
You would like to connect a payment
system.
- No payment system
The next settings are skipped and ini-
tial commissioning can be com-
pleted.
- Program operation
The machine is operated using a coin
box. The user purchases a wash pro-
gram.
- Timed operation
The machine is operated using a coin
box. The user purchases a time-con-
trolled program.
- Timed operation with pulse counter
For payment systems where the us-
age time is increased each time a
coin is inserted.
- COM module
The machine is operated by a central
control unit.
Feedback sig. to pay system
Setting the feedback signal for the
coin box.
- Factory default: Off
- End of program
The feedback signal is sent at the
end of the program.
- Release of the start button
The feedback signal is sent when the
start button is released.
- Start and end of program
The feedback signal is sent at the
start and end of the program.
- Program running
The feedback signal is sent con-
stantly between the start and end of
the program.
Clear paid signal
The “Paid” signal in coin-box mode
can be applied until the end of the
program or discarded if the program is
not started after 5minutes.
Factory default: Off