Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
84
Temperature unit
You can select the unit for the temper-
ature display.
Factory default: °F
Weight unit
You can decide whether load quanti-
ties are displayed in “kg” or “lbs”. You
can also switch this information off al-
together.
Factory default: lbs
Logo
You can choose whether the “Miele
Professional” logo or your own logo
appears in the display.
The option Laundromat Logomust be se-
lected for the settingControls.
Supervisor code
You can alter the access code to the
Supervisor level.
Enter the current code.
Enter a new code.
Program selection
Controls
You can select whether the washing
machine is operated as a “wash-sa-
lon” (launderette) machine. Shortcuts
are the easiest way to operate the ma-
chine. Operating staff are unable to
change pre-set programs.
Tip: Start by configuring all necessary
settings and changes to the washing
machine before adjusting any of the op-
tions below.
If “Laundromat, basic” or “Laundromat,
ext.” are selected, the Supervisor level
can no longer be opened from the dis-
play after the Supervisor level is closed.
Please follow the instructions below if
you wish to change any other settings.
Opening the Supervisor level (laundro-
mat version)
Switch on the washing machine and
open the door.
Touch the Start/Stopsensor control
and hold it down whilst carrying out
steps –.
Close the washing machine door.
The Start/Stop sensor control will
now be flashing quickly; wait until it
lights up constantly.
Release the Start/Stopsensor con-
trol when the Start/Stopsensor con-
trol lights up constantly.