Installation plan

PWM 908 en-US
 = standard,  = optional, + = only on request, - not available
11 282 580/03 9
Technical data
PWM 908 DV
PWM 908 DP
Peak load/energy management (SLA)
Machine connection (with XCI box LG)




Payment system connection (KGA)
Connection of payment systems (with XCI box LG)


Communication module (XKM)
Communication module XKM 3200 WL PLT


Liquid dispensing (DOS)
Connection for liquid dispensing agents


Max. no. of dispenser pumps
No.
6
6
XCI box LG interface




Installation on machine feet (F)
No. of machine feet
No.
4
4
Machine foot, height-adjustable with thread
inch (mm)
+5/16" (8)
+5/16" (8)
Machine foot diameter
inch (mm)
10.5 (40)
10.5 (40)
Anchoring (B)
Standard floor anchoring
Floor anchor kit (for 2 machine feet) with anchors


Wood screws according to DIN 571
inch (mm)
6 x 50
6 x 50
Rawl plugs (diameter x length)
inch (mm)
8 x 40
8 x 40
Anchoring of Miele Plinths
Accessory: Miele Plinth installation (fasteners included)


Required anchor points
No.
4
4
Wood screws according to DIN 571
inch (mm)
8 x 65
8 x 65
Rawl plugs (diameter x length)
inch (mm)
12 x 60
12 x 60
Plinth floor anchoring (to be provided on site)
Machine installation on on-site plinth (concrete or masonry)


Min. plinth installation footprint (W/D)
inch (mm)
23 5/8"/25 9/16" (600/650)
23 5/8"/25 9/16" (600/650)
Wood screws according to DIN 571
inch (mm)
6 x 50
6 x 50
Rawl plugs (diameter x length)
inch (mm)
8 x 40
8 x 40
Machine data
Overall machine dimensions (H/W/D)
inch (mm)
33 15/32"/23 13/16"/28
7/64" (850/605/714)
33 15/32"/23 13/16"/28
7/64" (850/605/714)
Casing dimensions (H/W/D)
inch (mm)
33 15/32"/23 7/16"/26
11/16" (850/596/678)
33 15/32"/23 7/16"/26
11/16" (850/596/678)
Site-access dimensions (H/W)
Min. site-access opening (excl. packaging)
inch (mm)
35 7/16"/23 13/16"
(900/605)
35 7/16"/23 13/16"
(900/605)
Installation dimensions
Min. side gap
inch (mm)
13/16" (20)
13/16" (20)
Recommended side gap – washer-dryer stack
inch (mm)
>11 13/16" (300)
>11 13/16" (300)
Min. distance to opposite wall from front of machine
inch (mm)
37 3/8" (950)
37 3/8" (950)
Recommended distance to opposite wall from front of machine
inch (mm)
43 5/16" (1,100)
43 5/16" (1,100)
Weights and floor loads
Machine weight (net weight)
lb (kg)
227 (103)
227 (103)
Max. floor load in operation
N
2,820
2,820
Max. floor load, static
N
1,380
1,380
Max. floor load, dynamic
N
1365
1365
Emissions
Sound pressure level (in accordance with EN ISO 11204/11203)
dB(A)
<70
<70
Heat dissipation rate to installation site
W
250
250