Programming instructions

Display
The display can be set to "Normal" or
"Detailed".
In the "Normal" setting only the pre-wash and
main wash temperatures, the final spin
speed of the last wash block and the area
name are shown in the display.
1 Cottons 10,0 / 10,0 kg
90 °C Main wash
Rinses 1100 rpm
+im k m A
All area and block names are displayed in
the "Detailed" setting.
1 Cottons 10,0 / 10,0
Pre-wash
40 °C Pre-wash 300 rpm e
+i mk m A
1 Cottons 10,0 / 10,0
Rinses 2 1200 rpm -
+i mk m A
Selection choice: - Normal - Detailed
Standby Display
If the "Standby display" is set to: "Yes" the
display comes on when a control element is
pressed. If no other operational measures
are taken the display will go into "Standby"
mode after 10 minutes. To let you know you
are in "Standby" the lightring around the Start
button will flash. Pressing any control will
switch the last active display back on again.
If the "Standby display" is set to: "No" the
display will stay on permanently.
Selection choice: - Yes - No
Contrast setting
The display contrast has settings from 1 to
10. It can be set to suit site requirements. As
soon as you change the setting the contrast
will change in the display.
Selection choice: - 1 to 10
Button allocation
If this is set to "Direct" the first 6 programmes
will be allocated to function buttons 1 to 6.
Selection choice: - Normal
- Direct
Clock display
The clock display can be set to a 24 h or
12 h one.
Selection choice: - 24 h - 12 h
Date display
The date is displayed according to language
set as follows:
Country Format
Deutschland, England,
Niederlande, Frankreich, Italien,
Finnland, Portugal, Spanien,
Dänemark, Norwegen,
Griechenland
Day/Month/Year
Schweden Year/Month/Day
USA Month/Day/Year
The date display can be changed if wished.
Selection choice: - auto
- Day/Month/Year
- Year/Month/Day
- Month/Day/Year
Settings
30 M.-Nr. 06 533 430