Technical data

Standby
To save energy, the display goes out
after 10 minutes and the
Start button
flashes slowly.
There are two options:
On
Stand-by comes on:
–
if a programme is not selected after
the machine has been switched on.
–
after a programme has started.
– at the end of a programme.
Not in current Prog.
(the machine is
delivered with this option selected)
Standby comes on:
– if a programme is not selected after
the machine has been switched on.
Operating the multi-function selector
switches the display back on again.
Memory
This option is visible in the display,
but not available on this machine!
Temperature units
You can chose for the temperature to
be displayed as
°C/Celsius or
°F/Fahrenheit .
The machine is delivered with the
°C
option selected.
Settings menu J
59