Technical data

External dispensing system
This machine is suitable for connecting to an external
dispensing system. For this, a conversion kit and separate
connection box are required, which must be installed by a
Miele approved service technician. The external pumps
are controlled by relays in the machine.
The reley is controlled as described in the separate
booklet supplied with the machine. The containers must
be filled with the correct detergent or disinfectant in the
order specified.
Empty sensor
When the Empty sensor is activated, a message appears in
the display to show when an external liquid agent container
is empty (see Settings/Supervisor level in the separate
booklet supplied with the machine).
If a container is empty, the following message will come up in
the display before the start of the programme or whilst the
programme is running:
Fill the container
i
OK
H
A programme that has already been started continues to run
until it has finished.
^
Press short cut button D to delete the message in the
display, and refill the container.
Detergent
32