Technical data

The timer can be used to select the time you want the

programme to finish. The start of a programme can be

delayed from 30 minutes up to a maximum of 24 hours,

To open the Timer sub-menu

Cottons Uni. 60°C 1400 rpm

Duration 0:47 h

Extras

Timer Y

Back A

Press short cut button E below the word Timer. This

opens the Timer sub-menu.

To select a delay start time

You can enter the finish time for a programme in 30 minute

stages.

Cottons Uni. 60°C 1400 rpm

10:03

Start time:

10:38

Finish:

11:30

^ Use the multi-function selector to select the programme

finish time and confirm your selection.

The programme finish time will be adjusted to the next full

or half hour.

The start of the programme will now be delayed in parallel

with the programme finish time you have selected.

To start the timer

Press the Start button.

The delay start time will be shown counting down in minutes.

To cancel the timer

Press short cut button G.

The actual load size can only be determined accurately by

the machine once the programme has started. This can

cause the finish time for the programme to vary.

Timer