Operating and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Description of functions
- Guide to the appliance
- Operation
- Energy-saving tips
- Service and warranty
- Cleaning and care
- Installation
- Air venting
- Electrical connection
- Technical data
Installation
34
A non-return flap is supplied with the
hood or is already fitted in the exhaust
socket of the motor unit (depending on
model).
With vented mode (AE) insert the
non-return flap in the exhaust socket
if your ducting system is not
equipped with one.
Recirculation mode (RM) does not
require the non-return flap to be
inserted. If there is one present, it
should be removed.
Hang the hood on the brackets,
making sure that the controls are at
the front.
Secure the hood with the screws
supplied.