Operating and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Description of functions
- Guide to the appliance
- Operation
- Energy-saving tips
- Service and warranty
- Cleaning and care
- Installation
- Air venting
- Electrical connection
- Technical data
Installation
33
Fit the four telescopic chimney
clamps. When the screws are
tightened, the clamps spread out and
push the telescopic expansion piece
upwards.
Tighten the screws only until the top
edge of the telescopic chimney is
evenly aligned with the ceiling or the
spacer frame.
Bend back the two retaining tabs.
Push the chimney over the telescopic
extension piece and bend the
retaining tabs outward again to
prevent the chimney from slipping
down again.