Manual

Cleaning and care
22
 When removing the filters for
cleaning, also clean off any
accessible oil or fat buildup from the
housing. Doing so will prevent a fire
hazard.
 Reinstall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
 If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
OdorFree Charcoal Filter
If the hood is equipped for recirculation,
an OdorFree Charcoal Filter must be
installed in addition to the grease filters.
This filter is designed to absorb odor-
causing agents and is mounted in the
canopy above the grease filters.
Charcoal filters are available to order via
the Miele Webstore, Miele Service (see
end of this booklet for contact details)
or directly from Miele.
Installing/replacing the OdorFree
Charcoal Filter
 To install or replace the OdorFree
Charcoal Filter, the grease filters must
first be removed as described above.
 Remove the OdorFree Charcoal Filter
from its packaging.
 Press the OdorFree Charcoal Filter
into the frame.
 Reinstall the grease filters.