Technical data

3 Electrical connection via plug connector

It is always recommended to make electrical connection via a plug and socket so

that electrical safety checks, e.g. during repair or service work, can be carried out

easily.

The socket must be accessible after machine installation. This also applies even

if an on-site mains switch is also already provided.

For models with a total connected load greater than 9 kW, an additional on-site

mains switch must also be provided.

Electrical connection must be carried out in accordance with all appropriate legal

requirements, accident prevention regulations and valid standards.

Descriptive Technical Documentation

DTD no. 521-7135 A-3