Technical data

Programmable function Option
Residual moisture level adjustment -
Minimum iron
The standard residual moisture levels can be modified to make them up to
3 stages dryer or damper, see 080 2.6 Residual moisture level adjustment
programmable function
Residual moisture level adjustment -
Machine iron
The standard residual moisture levels can be modified to make them dr yer
or damper, see 080 2.6 Residual moisture level adjustment programmable
function
Clean the airways warning, see 080 2.7
Clean the airways warning modification
programmable function
Off
Reduced sensitivity
Normal
Sensitive
Clean heat exchanger warning, condenser
dryers only, see 080 2.10 Clean heat
exchanger programmable function
Off
Display after 100 h
Display after 200 h
Display after 300 h
Display after 400 h
Display after 500 h
Display after 600 h
Display after 700 h
Display after 800 h
Display after 1000 h
Display after 1200 h
Display after 1400 h
Display after 1600 h
Cool air free, with payment system
operation, see 080 2.12 Cool air free
programmable function, with payment
system operation
Yes
No
Payment system operation, see 080 2.13
Payment system programmable function
Off (Delay star t possible)
Programme operation (MZK)
Timed operation (MZZ)
RS 232 interface active
Supervisor level code, see 080 2.14
Operator code programmable function
Code not required. User programmable functions can be modified.
Code required. After code entry, supervisor programmable functions can
be modified.
Signal to payment system socket (X1/1)
pin 7, see 080 2.15 Signal to payment
system socket (X1/1) pin 7 programmable
function
At programme end
When Start button is released
When Start button is released and at programme end
Overriding time control modification with
payment system operation, see 080 2.16
Overriding time control modification
programmable function with payment
system operation
120 min
135 min
150 min
165 min
180 min
195 min
210 min
225 min
240 min
Descriptive Technical Documentation
DTD no. 521-7135 080-31
14.10.2005, DE_en This information should not be duplicated or passed on without Miele approval. All rights reserved.