Technical data

Problem Possible cause Remedy
The programme
does not start and
the display is dark.
No obvious cause.
–
Is the dryer switched on?
–
Is the door closed properly?
–
Has the fuse or circuit
breaker tripped?
The interior drum
lighting does not
come on.
The lighting switches off
automatically (to save
energy).
It will switch on again after the
door has been closed and
then opened.
The lamp needs
changing.
Change the lamp as
described at the end of this
section.
The display is in a
different language.
A different language has
been selected in "Settings
J" "Language J".
Set the language you want.
The flag symbol will guide
you.
The Start button
light will flash when
a programme is
being selected.
This is not a fault.
The flashing indicates
that a programme can be
started.
After the programme has
started, the flashing will
change to a constant light.
The display is dark
and the light ring
around the
multi-function
selector is not lit up.
The Start button
light flashes slowly.
The display has switched
off automatically to save
energy (Standby mode).
The same applies to the
programme selector.
The display and programme
selector are lit up after
pressing a button or turning
the programme selector.
The programme selector
light goes out when the
Settings menu has been
selected.
The programme selector light
comes on when a programme
is selected.
If the problem persists,
there is a fault.
Contact the Miele Service
Department.
Problem solving guide
32