Technical data

Low temperature
^
For drying particularly sensitive
fabrics (care symbol r), e.g.
acrylics, press the
Low temperature
button.
Because the heater rating is reduced
for the
Low temperature setting, clothes
dry more slowly thus lengthening drying
times.
Delay start
^
See "Delay start".
Payment system
If your machine has a payment system,
the amount of credit required will
appear in the display.
Credit will be lost if the door is
opened or the programme cancelled
after it has started.
D Start the programme
The indicator light for the
Start button
will flash when a programme is being
selected. The flashing indicates that a
programme can be started.
^
Press the
Start button.
The indicator light for the
Start button
will then change from flashing to being
on constantly.
Programme running will appear in the
display, followed by
Drying and the
programme duration.
With sensor drying programmes the
drying level reached, e.g.
Machine iron ,
Hand iron etc. will appear in the display
later on.
Before the end of a programme
There is a cooling down phase at the
end of the drying sequence:
Cooling
down
will appear in the display. The
programme will not finish until the
cooling down phase has been
completed.
There is no cooling down phase at the
end of the following programmes:
Woollens hand care, Smoothing.
At the end of a programme
Anti-crease action (if selected) and
Finish will appear in the display at the
end of the programme.
During the anti-crease phase (if
selected) the drum will turn at intervals
for 1 hour to help prevent creasing.
E Remove the laundry
^ Press the
Door button to open the
drum door.
^ Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
The drum lighting will come on when
the door is opened. It will go out a few
minutes later to save energy.
^
Close the door.
Maintenance after each drying
programme
^
Please see "Cleaning and care" for
details.
How to dry correctly
16