Operating instructions/Installation instructions

Settings 
66
Venting DOS modules
This option is only visible when a DOS module is connected.
The dispensing system for liquid media can only dispense reliably if
the system has been purged of air.
The DOS system must be vented:
– If it is being used for the first time
– If the liquid detergent or rinse aid container was not refilled in time
and the DOS system was emptied.
 To avoid damage to the dispensing system, make sure before
venting that the detergent and rinse aid containers are adequately
filled and that the dispensing siphons are screwed securely to the
containers.
 Select the Settings  menu.
 Select DOS priming and confirm your choice with theOKbutton.
DOS priming
DOS1
DOS4
 Select the dispensing system to be vented using the  and  ar-
row buttons and confirm your choice with the OKbutton.
The dishwasher will then begin automatically venting the selected
dispensing system. Once this process is complete, Dispensing system
successfully primed will appear in the display.
 Press the OKbutton to acknowledge the message.