Operating instructions/Installation instructions
Table Of Contents
- Contents
- Guide to the manual
- Proper use
- IMPORTANT SAFETY INSTRUCTIONS
- Appliance description
- Caring for the environment
- User profiles
- Operation tips
- Commissioning
- Opening and closing the door
- Filling the salt container
- Adding rinse aid
- Application technology
- Operation
- Program chart
- Additional functions
- Settings
- Cleaning and care
- Frequently asked questions
- Frequently asked questions
- After sales service
- Installation
- Electrical connection
- Plumbing
- Technical details
Operation
52
Starting a program
Press the Start/Stop button.
The LED for the Start/Stop button will light up and the LED for the
button will go out.
Once it has been started, a program can no longer be changed.
A running program can either be interrupted (see "Interrupting a
program") or cancelled (see "Canceling a program").
Program cycle
display
After the start of a program, the wash phase description and, for 10
seconds, Program running are shown in the display.
During the program cycle, the arrow buttons and can be used to
switch between the wash phase, the set temperature, and the actual
temperature in the second line of the display.
The time remaining is shown in the third line of the display.
Normal plus
Main wash
Duration
G
Min
23