Operating instructions/Installation instructions

Adding rinse aid
33
Rinse aid
Rinse aid is necessary to ensure water does not cling and leave
marks on cookware before the drying phase and helps cookware dry
faster after it has been washed.
Rinse aid can be poured into the reservoir in the door or can be dis-
pensed via an external dispensing DOS module (Optional accessory -
see "DOS module").
 Only fill the rinse aid reservoir with rinse aid. Do not fill it with
detergent (including liquid detergent). This will seriously damage
the reservoir.
Conversion to the external DOS module must be carried out only
by Miele Service or by an authorized dealer.
Rinse aid indica-
tor
 Refill the rinse aid at the end of a program whenever the message
appears in the display.
K
OK
Refill rinsie aid
 Acknowledge the message with the OK button.
Normal plus
Temperature
Duration
:
55 °C
Min
23
If rinse aid is not added, the  symbol indicating low rinse aid will ap-
pear beside the program name on the right.
The refill reminder will be displayed again at the end of every subse-
quent program.
Refill reminders can be displayed during the program cycle by press-
ing the OK button.
If there are no additional refill reminders, the  symbol in the display
will go out a few seconds after the rinse aid has been refilled.