Operating instructions/Installation instructions
Table Of Contents
- Contents
- Guide to the manual
- Proper use
- IMPORTANT SAFETY INSTRUCTIONS
- Appliance description
- Caring for the environment
- User profiles
- Operation tips
- Commissioning
- Opening and closing the door
- Filling the salt container
- Adding rinse aid
- Application technology
- Operation
- Program chart
- Additional functions
- Settings
- Cleaning and care
- Frequently asked questions
- Frequently asked questions
- After sales service
- Installation
- Electrical connection
- Plumbing
- Technical details

Filling the salt container
28
Setting the water hardness level
The water softener can be set to between 0 and 73 gpg (0 - 70°dH
German scale).
Select the Additional settings menu.
Select Water hardness and confirm your choice with theOKbutton.
Water hardness
19
(0 - 70 °dH)
°dH
The factory default setting for the water softener is a hardness of 20
gpg (19°dH German scale).
Please observe the table below when setting the hardness level.
If the water hardness fluctuates, e.g. between 8 and 18 gpg (8 and 17
°dH German scale), always be sure to set the dishwasher to the
higher value, 18 gpg (17°dH German scale) in this example.
Use the arrow buttons (higher) and (lower) to set the required
water hardness level, and confirm your entry with the OKbutton.