Operating instructions/Installation instructions
Table Of Contents
- Contents
- Guide to the manual
- Proper use
- IMPORTANT SAFETY INSTRUCTIONS
- Appliance description
- Caring for the environment
- User profiles
- Operation tips
- Commissioning
- Opening and closing the door
- Filling the salt container
- Adding rinse aid
- Application technology
- Operation
- Program chart
- Additional functions
- Settings
- _
- Cleaning and care
- Frequently asked questions
- Frequently asked questions
- After sales service
- Installation
- Electrical connection
- Plumbing
- Technical details
Adding rinse aid
34
Adding rinse aid
Open the door all the way.
Unscrew the lid of the rinse aid compartment.
Add rinse aid only until it is up to the maximum mark on the edge of
the funnel on the reservoir.
The rinse aid compartment holds approx. 10oz (300ml).
Screw the lid of the rinse aid compartment back on tightly so that
water cannot get into the compartment during the wash cycle.
Run the "Cold" program to rinse away any spilled rinse aid. This
prevents over-foaming occurring during the next program.
You can adjust the dispensing quantity of the rinse aid for best
results (see "Additional settings, Additional functions").