Operating instructions/Installation instructions
Table Of Contents
- Contents
- Guide to the manual
- Proper use
- IMPORTANT SAFETY INSTRUCTIONS
- Product description
- User profiles
- Operation tips
- Commissioning
- Opening and closing the door
- Filling the salt container
- Adding rinse aid
- Application technology
- Operation
- Additional functions
- Program chart
- Settings
- Additional settings
- Cleaning and care
- Frequently asked questions
- Frequently asked questions
- After sales service
- Installation instructions
- Caring for the environment
- Installation
- Electrical connection
- Plumbing
- Technical details
Cleaning and care
95
Cleaning the spray arms
This Commercial Dishwasher has three different spray arms.
Particles of food can get stuck in the spray arm jets and bearings.
The spray arms should therefore be checked and cleaned regularly.
Switch the Commercial Dishwasher off.
Pull the upper spray arm downwards to remove it.
The middle and bottom spray arms are secured with a bayonet
fitting.
The bayonet fitting on the lower spray arm is colored yellow so that
it cannot be mistaken for the fitting on the middle spray arm.
To release the bayonet fitting proceed as follows:
Using the knurled nut, turn the middle spray arm to the left as far
as it will go and then pull the spray arm downwards to remove it.
Remove the lower basket.
Using the knurled nut turn the lower spray arm to the right as far
as it will go and then pull the spray arm upwards to remove it.