Operating instructions/Installation instructions
Table Of Contents
- Contents
- Guide to the manual
- Proper use
- IMPORTANT SAFETY INSTRUCTIONS
- Product description
- User profiles
- Operation tips
- Commissioning
- Opening and closing the door
- Filling the salt container
- Adding rinse aid
- Application technology
- Operation
- Additional functions
- Program chart
- Settings
- Additional settings
- Cleaning and care
- Frequently asked questions
- Frequently asked questions
- After sales service
- Installation instructions
- Caring for the environment
- Installation
- Electrical connection
- Plumbing
- Technical details
Additional settings
77
Additional functions
With these functions, it is possible to adjust individual parameters to
adapt program cycles to particular types of soiling and optimize
cleaning results.
Select the Additional settings menu.
Select Additional functions and open the corresponding menu by
pressing the OKbutton.
In the following menu, you can choose between:
- Reset
Reset all of the parameters changed under the “Additional
functions” menu to their factory defaults.
- Increased water level
Increase the amount of water used in all wash programs.
- Interim rinse
Include an interim rinse in all programs that support this feature
(see “Program chart”).
- Dispensing system
Vent the dispensing systems and change the name of the dispenser
modules.
- Temperature / Time
Change the temperature and holding time for the main wash and
final rinse stages of a wash program.
Resetting
Select the Reset option and confirm your choice with the
OKbutton.
Reset
Yes
No
(
Select the Yes option and confirm your choice with the OKbutton.
All parameters that have been changed under “Additional
functions” will be reset to the factory default setting.