Operating instructions/Installation instructions
Table Of Contents
- Contents
- Guide to the manual
- Proper use
- IMPORTANT SAFETY INSTRUCTIONS
- Product description
- User profiles
- Operation tips
- Commissioning
- Opening and closing the door
- Filling the salt container
- Adding rinse aid
- Application technology
- Operation
- Additional functions
- Program chart
- Settings
- Additional settings
- Cleaning and care
- Frequently asked questions
- Frequently asked questions
- After sales service
- Installation instructions
- Caring for the environment
- Installation
- Electrical connection
- Plumbing
- Technical details
Program chart
55
Program cycle
1.
Pre-wash
2.
Pre-wash
3.
Main wash
(1) / (2)
4.
Interim rinse
5.
Interim rinse
6.
Final rinse
(1) / (2)
X
131°F (55°C)
30s
(X) X *)
131°F (55°C)
30s
X X
131°F (55°C)
2min
X (X) X
140°F (60°C)
1min
X X
140°F (60°C)
3min
X (X) X
158°F (70°C)
10min
X X
131°F (55°C)
1min
(X) X
140°F (60°C)
1min
X X X
149°F (65°C)
3min
X (X) X
140°F (60°C)
1min
X
122°F (50°C)
1min
X (X) X
122°F (50°C)
1min
X
122°F (50°C)
1min
X (X) X
- (3)
1min
X X
140°F (60°C)
2min
X (X) X
131°F (55°C)
1min
*) Important note for the “” program.
With the “Rapid” program, water from the final rinse is not pumped away at the end of the program. It is used for the
main wash cycle in the next “Rapid” program.
If the water temperature drops below 104°F (40°C), or if another program is started, this water will be automatically
pumped away when the next program starts.
X = Stages included in the program
(X) = Optional stages that can also be selected (see “Additional settings, Additional functions”)
(1) Temperature range of 86 - 158°F (30 - 70°C) (see “Additional settings, Additional functions”).
(2) Holding time range of 0 - 10minutes (see “Additional settings, Additional functions”).
The holding time range in the “Rapid” program is 0 - 300 seconds.
(3) Runs with cold water and without rinse aid.