Operating instructions/Installation instructions
Table Of Contents
- Contents
- Guide to the manual
- Proper use
- IMPORTANT SAFETY INSTRUCTIONS
- Product description
- User profiles
- Operation tips
- Commissioning
- Opening and closing the door
- Filling the salt container
- Adding rinse aid
- Application technology
- Operation
- Additional functions
- Program chart
- Settings
- Additional settings
- Cleaning and care
- Frequently asked questions
- Frequently asked questions
- After sales service
- Installation instructions
- Caring for the environment
- Installation
- Electrical connection
- Plumbing
- Technical details
Operation
42
Detergent
quantity
Always follow the recommendations of the detergent manufacturer.
There are markings to help you add the right amount of detergent: 20
and 40. The marks indicate a level of approx. 20 or 40ml (0.7oz or
1.3oz) when the door is open in the horizontal position. They also
indicate the approx. amount in grams (depending on the
manufacturer and the coarseness of the powder).
The compartment holds a maximum of 60ml (2oz).
Tips for the Rapid program
With the Rapid program, the final rinse water is not pumped out at the
end of the program in order to achieve short program durations in
continuous use.
Detergent cannot be rinsed out of the dispenser during the short
program time.
If liquid detergent is not being dispensed, dispense powder
detergent directly onto the inside of the door.
To avoid corrosion or discoloration, the wash program must be
started immediately after dispensing detergent directly onto the
inside of the door.