Operating instructions/Installation instructions
Table Of Contents
- Contents
- Guide to the manual
- Proper use
- IMPORTANT SAFETY INSTRUCTIONS
- Product description
- User profiles
- Operation tips
- Commissioning
- Opening and closing the door
- Filling the salt container
- Adding rinse aid
- Application technology
- Operation
- Additional functions
- Program chart
- Settings
- Additional settings
- Cleaning and care
- Frequently asked questions
- Frequently asked questions
- After sales service
- Installation instructions
- Caring for the environment
- Installation
- Electrical connection
- Plumbing
- Technical details
Adding rinse aid
31
Adding rinse aid
Open the door fully.
Unscrew the lid of the rinse aid container.
Add rinse aid only until it is up to the maximum mark on the edge of
the funnel on the container.
The rinse aid container holds approx. 10oz. (300ml).
Screw the lid of the rinse aid container back on tightly so that water
cannot get into the container during the wash cycle.
Run the “Cold” program to rinse away any spilled rinse aid. This
prevents over-foaming occurring during the next program.
You can adjust the dispensing quantity of the rinse aid for best
results (see “Additional settings, Additional functions”).