Convection Oven Owner's Manual

Features
29
Model numbers
A list of the ovens described in these
operating instructions can be found on
the back page.
Data plate
The data plate is behind the toe-kick.
The toe-kick cover is attached to the
base of the range by magnets so it can
be removed and put back again easily.
There you can find the model number,
the serial number and the connection
data (voltage/frequency/maximum rated
load) for your range.
Have this information available when
contacting Miele Technical Service.
Items included with this range
The following items are included with
this appliance:
– Installation instructions for the range
– The operating instructions for the
range:
– Gas Top Part
– Convection Oven
– Speed Oven
– Warming Drawer
– An anti-tip device, including screws
for fastening the range
– Various accessories
Standard and optional
accessories
Accessories vary depending on
model. All ovens are supplied with
shelf runners, a universal tray and a
wire oven rack. Depending on the
model, your oven may also come with
the additional accessories listed.
All accessories and cleaning and care
products in these instructions are
designed to be used with Miele ovens.
These can be ordered from the Miele
web store, Miele Technical Service, or
from your Miele dealer.
When ordering, please have ready the
model number of your oven and of the
desired accessories.
Shelf runners
The shelf runners are located on the
right and left sides of the oven interior
and provide the levels  for inserting
accessories.
The shelf level numbers are indicated
on the front of the oven frame.
Each shelf level has two rails, one
above the other:
– Slide the accessories (e.g. wire oven
rack) into the oven between the rails.
– Attach the telescopic runners and
wire oven rack (if available) to the
bottom rail.
The shelf runners can be removed for
cleaning purposes. (See “Cleaning and
care”.)