Operation Manual

When installing the appliance ensure
that there is sufficient ventilation to
and from the appliance both
underneath and to the rear. Do not
block the ventilation gaps or block
the gap between the base of the
appliance and the worktop surface.
A minimum installation height of 850
mm must be maintained.
The microwave oven can be placed on
a worktop.
To ensure adequate ventilation, a
minimum of gap of 5 cm is required
between the appliance and any
neighbouring furniture or walls.
There must be a minimum gap of
19.5 cm between the top of the
appliance and anything above it.
The microwave oven can also be built
into a tall unit using a microwave lift up
door. A special fitting kit available from
your Miele Dealer or the Miele Spare
Parts Department is required. It is
supplied with fitting instructions.
Do not lower the lift up door when
the microwave oven is in operation.
Installation
53