Operation Manual

Stainless steel surfaces and controls
are susceptible to scratches and
abrasion.
Please observe the separate cleaning
instructions for
–
stainless steel surfaces,
–
stainless steel coloured controls.
Stainless steel surfaces
Stainless steel surfaces can be cleaned
with a proprietary non-abrasive
cleaning agent designed specifically
for use on stainless steel. N.B. Do not
use it on the controls.
Do not use:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers,
or sponges which have been
previously used with abrasive
cleaning agents.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel
such as Neoblank (available from the
Miele UK Spare Parts Department) can
also be used. Follow the manufacturer's
instructions and apply sparingly
following the direction of the grain.
Wipe dry with a soft cloth.
Controls
The controls may suffer
discolouration or damage if soiling is
left on them for too long. Remove
any soiling straight away.
Do not use:
–
cleaning agents containing soda,
acids or chlorides,
–
abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– stainless steel cleaning agents,
– descaling agents,
– oven sprays.
Cleaning and care
47