Operation Manual

Programming
50
Programme
1)
Code
2)
Settings
P:10 Signing WiFi on C:00 Not active/deactivated
C:01 Active but not configured
C:02 Active and configured
C:03 Connection possible via WPS push
button
C:04 WiFi reset to default (C:00)
C:05 Direct WiFi connection between
hob and external hood without
App (Con@ctivity3.0)
P:12 Sensor controls reaction
speed
C:00 Slow
C:01 Normal
C:02 Fast
P:15 Permanent pan recognition C:00 Not active
C:01 Active
1)
Unlisted programmes are not assigned.
2)
The factory setting is shown in bold.
3)
After the hob has been switched on,  appears in the timer display for a few seconds.
4)
The total hob power may be reduced in order to meet the local network provider’s re-
quirements.
5)
In the text and charts, the extended power levels are shown with a dot after the number
for better understanding.
6)
The keypad tone for the On/Off sensor control cannot be switched off.