Operation Manual

Additional functions
43
Wipe protection
The hob sensors can be locked for
20s in order, for example, to remove
soiling. The is not locked.
Activating
 Touch the sensor.
The time will count down in the timer
display.
Deactivating
 Touch the sensor until the timer
display goes out.
Demonstration mode
This function enables the hob to be
demonstrated in showrooms without
heating up.
Activating / Deactivating
 Switch the hob on.
 Touch the0 sensor control on any of
the numerical keybanks.
 Then touch the0 and 2 sensors at
the same time for 6seconds.
In the timer display,  flashes altern-
ately with  (demonstration mode ac-
tivated) or  (demonstration mode de-
activated) for a few seconds.
Displaying hob data
The model number and software ver-
sion of the hob can be displayed. There
must not be any pots or pans on the
hob.
Model designation
 Switch the hob on.
 Touch the0 sensor control on any of
the numerical keybanks.
 Then touch the 0 and 4 sensor con-
trols at the same time.
The timer display shows 2 numbers
flashing alternately:
Example:  flashing alternately with 
= KM1234
Software version
 Switch the hob on.
 Touch the0 sensor control on any of
the numerical keybanks.
 Then touch the 0 and 3 sensor con-
trols at the same time.
Numbers appear in the timer display:
Example: : = Software version 2.00