Operation Manual

Operation
38
Extractor
The extractor will switch itself on auto-
matically if a there is a pan on a cook-
ing zone and a power level has been set
for that zone (Con@ctivity). The power
level on the extractor is set to suit to the
power level on the hob.
You can deactivate Con@ctivity tempor-
arily.
The power level of the extractor can be
manually altered at any time. For light to
heavy cooking vapours, select from
power levels 1 to 3. For short periods of
strong vapours and cooking odours,
e.g. whilst searing meat, select the B
Booster setting.
Tip: To help release vapours effectively
with pans over 15cm high, place a
wooden spoon between the lid and the
pan.
Power level setting / Switching off
 To switch the fan on touch the appro-
priate sensor for the power level you
want.
 To switch the fan off touch the 0
sensor.
If the extractor is not switched off, it
will switch itself off 12hours after the
last automatic operation.
Deactivating Con@ctivity
The extractor has switched on automat-
ically.
 Touch the 0 control to deactivate
Con@ctivity.
 Set the power level you want.
Con@ctivity is activated again when
you switch the hob off and back on
again.
Booster
The maximum duration for the Booster
is 10minutes.
 To switch it off early, set a different
power level.