Operating Instructions and Installation Instructions
Miele@home / Con@ctivity
50
If you want to sign the hob
– on to the Miele@home
system, first
prepare the signing on procedure on
the master (display) appliance.
– To sign on to Con@ctivity, you must
first sig
n the cooker hood on.
Signing on the hob
W
ith the hob switched off, touch the
and sensors at the same time
until the indicator light for the safety
lock flashes.
In the timer display, (
programme) and
(status) appear. The programme num‐
ber will be displayed to the left of the
control scales and the set status to the
right.
T
ouch the number 1 on the rear left
control scale (set to programme 10).
T
ouch the number 2 on the front
right control scale (set to status 2 =
sign on).
The signing-on procedure starts and
number 2 flashes o
n the front right con‐
trol scale. The signing-on procedure will
take a few minutes. The number 2 lights
up constantly as soon as the procedure
has been completed successfully.
T
o save the setting, touch the sen‐
sor until the displays go out.
Fi
nish signing on the cooker hood/
master appliance (see the relevant in‐
structions).
Signing off the hob
If you would light to sign off the hob
fr
om Miele@home, first carry out the
signing-off procedure on the display
device.
W
ith the hob turned off, touch the
and sensors at the same time
until the indicator light for the safety
lock flashes.
In the timer display, (
programme) and
(status) appear. The programme num‐
ber will be displayed to the left of the
control scales and the set status to the
right.
T
ouch the number 1 on the rear left
control scale (set to programme 10).
T
ouch number 1 on the right front
control scale (set Status 1 = signing-
on).
The signing-off procedure starts and
number 1 flashes o
n the right front of
the control scale. The signing-off pro‐
cedure will take a few minutes. The
number 1 lights up constantly as soon
as the procedure has been completed
successfully.
T
o save the setting, touch the sen‐
sor until the displays go out.