Operating Instructions and Installation Instructions

Safety features
36
System lock / Safety lock
The system lock and safety lock are
deactiva
ted if there is an interruption
to the power supply.
Three-finger control is the default set‐
ting. Y
ou can change the default to
one-finger control (see "Program‐
ming").
Your hob is equipped with a system
lock
and a safety lock to prevent the
hob and the cooking zones being
switched on or any settings being al‐
tered.
The system lock is activated when the
hob is switched off. When it is activa‐
ted, the hob cannot be switched on and
the timer cannot be used. The hob is
programmed so that the system lock
must be activated manually. It can be
programmed to be activated automati‐
cally 5 minutes after the hob has been
switched off if the system lock is not
manually activated first (see "Program‐
ming").
The safety lock is set when the hob is
switched on. When the safety lock is
a
ctivated,
– the cooking zone power levels and
the timer settings cannot be
changed.
– the cooking zones, the hob and the
timer can be switched off, but once
switched off cannot be switched on
again.
If a locked sensor is touched when the
safety lock or the
system lock is activa‐
ted, the indicator light comes on and 
appears in the timer display for a few
seconds.
Activating
 T
ouch the  sensor and the  sensor
of both right cooking zones until 
the indicator light appears in the tim‐
er display and the safety lock indica‐
tor light comes on.
The indicator light and  go ou
t after
a short while.
Deactivating
 T
ouch the  sensor and the  sensor
of both right cooking zones until the
 indicator light goes out in the timer
display and the safety lock indicator
light goes out.