Operating Instructions and Installation Instructions

Timer
34
Using both timer functions at
the same time
The minute minder and automatic
switch-off functions can be used at the
same time.
If you have programmed in one or more
switch-o
ff times, and would like to use
the minute minder as well:
 T
ouch the  sensor repeatedly until
the indicator lights of the program‐
med cooking zones light up con‐
stantly and  appears in the timer
display.
 Set the time as described above.
If you have set the minute minder and
would lik
e to programme in one or more
switch-off times as well:
 T
ouch the  sensor repeatedly until
the indicator light for the zone you re‐
quire flashes.
 Set the time as described above.
Shortly after the last entry, the timer
display switches t
o the function with
the shortest remaining time.
If you want to show the times remaining
which ar
e counting down in the back‐
ground:
 T
ouch the  sensor repeatedly until
– the indicator light for the cooking
zon
e you want flashes (automatic
switch-off).
– The timer display (minute minder)
star
ts flashing.
Starting with the shortest time remain‐
ing which is shown in the display, all
coo
king zones which are switched on
and the minute minder are selected
clockwise.