Operating Instructions and Installation Instructions

Operation
27
Auto heat-up
When Auto heat-up has been activated,
the coo
king zone switches on automati‐
cally at the highest power setting and
then switches to the continued cooking
setting. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
Activating
 T
ouch the sensor for the continued
cooking setting you want until a tone
sounds and the sensor starts to flash.
During the heat-up time (see chart), the
continued cooking level set will flash.
Wi
th extended power levels (see "Pro‐
gramming"), the power levels before
and after the interim power level will
flash if an extended power level setting
has been selected.
Altering the continued cooking setting
while the cooking zone is heating up
deactivat
es Auto heat-up.
Deactivating
 T
ouch the sensor for the continued
cooking setting,
or
 sele
ct a different power level.
Continued cook‐
ing setting
Heat-up time
[min : sec]
1 approx. 0 : 15
1. approx. 0 : 15
2 approx. 0 : 15
2. approx. 0 : 15
3 approx. 0 : 25
3. approx. 0 : 25
4 approx. 0 : 50
4. approx. 0 : 50
5 approx. 2 : 00
5. approx. 5 : 50
6 approx. 5 : 50
6. approx. 2 : 50
7 approx. 2 : 50
7. approx. 2 : 50
8 approx. 2 : 50
8. approx. 2 : 50
9 –
The continued cooking settings with a dot
aft
er the number are only available if the
power level range has been extended (see
"Programming").