PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 8mieleusa.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 SPECIFICATIONS KFNS 37692 iDE-1 — Item 38376922USA - Right Hinged (Convertible) Overall Unit Width 22” (559 mm) Overall Unit Height 6911/16” (1770 mm) Overall Unit Depth 211/2” (545 mm) Niche Minimum Cabinet Opening Width 221/16 ” (560 mm) Minimum Cabinet Opening Height 693/4” (1772 mm) Minimum Cabinet Opening Depth 215/8” (550 mm) Interior Volume Fresh Food Volume 6.3 cu-ft (178 L) Freezer Volume 2.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 INSTALLATION DIMENSIONS For additional information on Plumbing, please refer to the Plumbing section in the Install Manual. For Side-by-Side installations two niche cutouts are required.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 VENTILATION DIMENSIONS - Air intake (1) occurs via the plinth at the bottom of the appliance and the air escapes at the top (2) at the rear of the housing unit. - A ventilation gap of at least 1 5/8” (40 mm) depth must be provided behind the appliance for air to circulate. - The ventilation cross-sections in the plinth housing unit and above the appliance must amount to at least 78 3/4”2 to ensure that air can circulate without obstruction.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 TOP VENTILATION CROSS-SECTION (1) Directly above the appliance with a ventilation grill (free airflow of at least 78 3/4”2). (2) In between the housing unit and ceiling. (3) Through a suspended ceiling. - Please refer to manual for further ventilation details.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 BOTTOM VENTILATION SLITS DIMENSIONS If you would like to use the ventilation slits: - Cut an opening in the plinth (2) as shown in the figure. - Place the ventilation grille (1) inot the opening.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 CUSTOM PANEL j - Top door panel k - Bottom door panel l - Unit's top door m - Unit’s bottom door KFNS 37692 iDE-1 Page 7 of 9 Specification Sheets TRS 05232017
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 CUSTOM PANEL CONTINUED SPECIFICATIONS Custom Panel Refer to manual for further detail Maximum Panel Weight Top Panel - 44 lbs (20 kg) Bottom Panel - 26 lbs (12 kg) Maximum Panel Thickness 3 Minimum Panel Thickness 5 /4” (19 mm) /8” (16 mm) Inset Panel Minimum Vertical Gap - Between Cabinet 1 /8” (3 mm) and Door Panel Minimum Horizontal Gap - Between Top Cabinet Panel and Door, Between 1/8” (3 mm) Door Panels Framed Cabinet with Inset Door Pan
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 ADJUSTABLE DOOR HINGE 90o or 120o Opening The door hinges are factory set so that the door can be opned wide. However if the opening angle of the door needs to be limited for any reason, the hinge can be adjusted to accommadate this. Insert the limit pins provided into the hinges from above. This will limit the opening angle of the applinace door to 90 o.
